翻訳と辞書 |
joint test action group : FOLDOC | Joint Test Action Group (JTAG, or "IEEE Standard 1149.1") A standard specifying how to control and monitor the pins of compliant devices on a printed circuit board. Each device has four JTAG control lines. There is a common reset (TRST) and clock (TCLK). The data line {daisy chains} one device's TDO pin to the TDI pin on the next device. The protocol contains commands to read and set the values of the pins (and, optionally {internal registers}) of devices. This is called "{boundary scanning}". The protocol makes board testing easier as signals that are not visible at the board connector may be read and set. The protocol also allows the testing of equipment, connected to the JTAG port, to identify components on the board (by reading the device identification register) and to control and monitor the device's outputs. JTAG is not used during normal operation of a board. {JTAG Technologies B.V. (http://jtag.com/)}. {B
スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|